USSC King 2007B - Blower Assembly Installation; Blower Assembly Instructions

6
KEY DESCRIPTION PART NO. QTY.
1 Blower Motor 80442 1
2 Blower Housing Front 25090B 1
3 Blower Housing Back 25089B 1
4 Power Supply Cord 80232 1
5 Rheostat w/Nut and Knob 80090 1
6 Strain Relief Bushing 80109 1
N/S 10AB x 3/8 Hex Zinc Screw 83222 8
N/S #12 x 3/4 Teks Screw C23799 4




With pliers, cut the 6 micro-joints and remove panelNote: Discard the panel.

Fix the assembly to the back of the stove with the four screws provided.



