UST GG5500 Series User Manual

3.PRE-OPERATION CHECK
1.OIL LEVEL
1.Remove the oil filler cap/dipstick and
wipe off any oil.
2.Insert the oil filler cap/dipstick into
oil filler neck,but do not screw it in!
Let the filler cap/dipstick sit above
the oil level.
3.Add oil if the oil level is low
before starting.
2.FUELLEVEL
1.Remove the fuel tank cap.
2.Check the fuel level if
the fuel level is low.
3.Add the unleaded gasoline
to the shoulder of the
filter screen.
4.Install the fuel tank cap.
CAUTION: Be sure to check the generator engine fluid levels with the generator on a level surface
Recommended oil:4-stroke motor oil service classification SJ,SL, SG or SAE 10W-30 for general
temperature.
- 3 -

UST GG5500 Series Specifications

General

Brand	UST
Model	GG5500 Series
Category	Portable Generator
Language	English