8
8-27
Default Setting (System Menu)
Date/Timer
Date/Timer settings include:
ā¢ Date/Time ā¦8-27
ā¢ Date Format ā¦8-29
ā¢ Time Zone ā¦8-30
ā¢ Summer Time ā¦8-31
ā¢ Auto Error Clear ā¦8-32
ā¢ Low Power Timer ā¦8-35
ā¢ Sleep Rules (models for Europe) ā¦8-36
ā¢ Sleep Level (models except for Europe) ā¦8-37
ā¢ Sleep Timer ā¦8-39
ā¢ Auto Panel Reset ā¦8-40
ā¢ Unusable Time ā¦8-43
NOTE: If user login administration is enabled, you can only change the settings by logging in with administrator
privileges.
Date/Time
Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and time
set here will be displayed on the header.
CAUTION: Be sure to set Time Zone before the Date/Time setup.
Use the procedure below to set the date and time.
1 In the Sys. Menu/Count. menu, press the ļ² or ļ³ key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
To Next Page
Loading...
Need help?
General
