Utax P-3520 MFP User Manual

8
8-117
Default Setting (System Menu)
Send/Box Density
Adjust scan density when sending or storing the data in Document Box. Adjustment can be made in 7 levels.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu appears.
3 Press the  or  key to select [Send/Box Density].
4 Press the OK key. Send/Box Density appears.
5 Press the  or  key to select the density from [-3
Lighter] to [+3 Darker].
6 Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
Backgrnd Density
Darkens or lightens the overall background density. Copy mode and send/document box mode can each be adjusted
to one of seven levels. Use the procedure below to specify the setting for Background Density.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu appears.
3 Press the  or  key to select [Backgrnd Density].
Sys. Menu/Count.: a b
: Document Box
; Edit Destination
*********************
[ Exit ]
< Adjust/Maint.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Backgrnd Density
[ Exit ]
1 Copy Denst. Adj.
Send/Box Density: a b
3 -1
*********************
5 +1
4 * 0 Normal
Sys. Menu/Count.: a b
: Document Box
; Edit Destination
*********************
[ Exit ]
< Adjust/Maint.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Backgrnd Density
[ Exit ]
1 Copy Denst. Adj.

Utax P-3520 MFP Specifications

General

Brand	Utax
Model	P-3520 MFP
Category	All in One Printer
Language	English