Operation Panel
4-90
Sleep Timer (Sleep timer timeout time)
You can adjust the length of time the printer waits before entering Auto Sleep in the absence of data. The printer reverts to
normal operation mode when the printer receives a print job, [OK] is pressed or one of the exterior covers is opened. The
default time is 1 minute.
1 In the Timer Setting menu, press or to select Sleep Timer.
2 Press [OK]. The Sleep Timer screen appears.
3 Use the numeric keys or or to set the sleep time.
4 Press [OK]. The sleep time setting is stored and the Timer
Setting menu reappears.
Power Off Rule (Power Off Rule setting)
The Power Off Rule is used to stop the power from automatically turning off when the machine is in certain states or certain
settings are in effect. Rules that can be set and their initial settings are as follows:
1 In the Timer Setting menu, press or to select Power Off
Rule.
2 Press [OK]. The Power Off Rule menu screen appears.
Item
Default Value
P-4030D
P-4030DN/P-4530DN/
P-5030DN/P-6030DN
For EU countries
†
†
The default value is not displayed and customized.
Other than EU
countries
Network (Network interface setting)
––Off
USB Cable (USB interface setting)
On Off Off
USB Host (USB memory slot setting)
On Off Off
RAM Disk (RAM Disk Mode setting)
††
††
If the Power Off Rule is previously set to On, the machine turns off the power and all the data stored in the RAM Disk is
deleted.
Off Off Off
NIC (Option Network interface kit (NIC) setting)
Off Off Off
Parallel I/F (Parallel interface setting)
On Off Off
Note When On is set it automatically turns off.
Network is only displayed on network compatible models.
NIC is only displayed when the optional network interface kit (IB-50) or wireless network interface kit (IB-51) has been
installed.
Parallel I/F is only displayed when the optional parallel interface kit (IB-32) has been installed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
