Utax P-4030D - Page 230

Document Box
5-36
4 Press  or  to select the desired Automatic Delete time. The list
shows the following times:
Off (automatic delete is not performed)
1 hour (deleted in 1 hour)
4 hours (deleted in 4 hours)
1 day (deleted on the next day)
1 week (deleted after one week)
5 Press [OK]. The setting is stored and the Job Box Setting menu
reappears.
Storage Media (Selecting the storage media for the jobs)
If the optional SSD and SD/SDHC memory card are both installed, it is possible to select which storage media to use.
1 In the Job Box menu, press  or  to select Job Box Setting.
2 Press [OK]. The Job Box Setting screen appears.
3 Press  or  to select Storage Media and press [OK]. The
Storage Media screen appears.
4 Press  or  to select the desired storage media. The list shows the
following media:
Internal Memory (SSD)
SD Card
5 Press [OK]. The setting is stored and the Job Box Setting menu
reappears.
JobRet. Deletion: a b
********************-
2 1 hour
3 4 hours
1 *Off
Note After this setting has been done, turn the machine OFF and ON again. This is mandatory to make the
settings effective.
Job Box Setting: a b
********************-
2 JobRet. Deletion
3 Storage Media
[ Exit ]
1 Quick Copy Jobs
Storage Media: a b
********************-
2 SD Card
1 *Internal Memory