4-47
Using the Operation Panel
Job Name (The Job Name display settings)
Set whether the job name set in the printer driver is displayed.
1 Press while Print Settings > is displayed.
2 Press or repeatedly until >Job Name appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Press or to display the job name to be used.
Off (Use the job name set in the printer driver.)
Job Name
Job No.+Job Name
Job Name+Job No.
5 When the desired color mode is displayed, press [OK]. Color mode
is changed.
6 Press [MENU]. The display returns to Ready.
To Next Page
Loading...
