Utax P-C2660DN User Manual

4-85
Using the Operation Panel
2 Press [OK]. A blinking question mark (?) appears.
3 Select On or Off using  or .
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
AES (SSL Server AES setting)
AES (Advanced Encryption Standard) was developed to replace DES as
the standard encryption as the safety of DES has declined. AES is a block
encryption system that uses 128-bit blocks and an SPN structure (a
typical structure for repeated encryption) with three selectable key
lengths of 128, 192 and 256 bits.
The default setting is On.
1 Press  while >SSL Server On > is displayed. >>AES appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select On or Off using  or .
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
IPP over SSL (SSL Server IPP over SSL setting)
IPP over SSL is an encryption function that uses SSL for communications
between users and servers in network printing. To use IPP over SSL, both
server and client must support the protocol.
The default setting is Off.
1 Press  while >SSL Server On > is displayed. >>IPP over SSL
appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select On or Off using  or .
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
HTTPS (SSL Server HTTPS setting)
HTTPS (HyperText Transfer Protocol Secure) is a protocol that adds SSL
data encryption, message authentication and a digital signature function
to the HTTP protocol used for data transfer between WWW servers and
clients.
S-HTTP is a similar protocol, but HTTPS differs in that it uses SSL.
The default setting is On.
1 Press  while >SSL Server On > is displayed. >>HTTPS appears.
>>3DES
? On
>>AES
? On
>>IPP over SSL
? Off

Utax P-C2660DN Specifications

General

Brand	Utax
Model	P-C2660DN
Category	Printer
Language	English