Using the Operation Panel
4-24
(User Name) (Data Name) (Selecting the data)
(Data Name) Copies (number of copies) (Number of copies / deleted)
• Printing a Private Print/Stored Job
Private/Stored (User Name) (Selecting the User)
(User Name) (Data Name) (Selecting the data)
(Data Name) ID (number of copies) (Input passwords)
(Data Name) Copies (number of copies) (Number of copies / deleted)
• Job Box Configuration (Job Box Configuration)
1 Press [MENU].
2 Press or repeatedly until Job Box > appears.
Note that menus shown in the list may vary depending on which optional
units installed in the printer.
Quick Copy (Using Quick Copy)
This mode enables you to print the requested number of copies of a job,
simultaneously storing the job on the SSD. When additional copies are
required, you can reprint the required number of copies from the printer
operation panel. To print a job as a quick copy job, refer to Printing
System Driver User Guide.
The default number of print jobs that can be stored on the SSD is 32. This
value can be increased to up to 50 from the Job Box Configuration menu.
For details, refer to Changing the Maximum Number of Quick Copy on
page 4-28. When the number of jobs reaches the limit, the oldest job will
be overwritten by the new one.
When the printer is turned off, all stored jobs will be deleted.
Printing Additional Copies using Quick Copy
1 Press while Job Box > is displayed.
2 Press or repeatedly until >Quick Copy appears. The name
entered in the printer driver (Harold, in this example) also appears.
3 Press [OK]. A blinking question mark (?) appears before the user
name.
4 Press or to display the desired user name, Arlen, in this
example.
5 Press [OK]. The job name entered in the printer driver (Report, in
this example) appear with a blinking question mark (?) before the
letters.
6 Press or to scroll to the desired job title.
To Next Page
Loading...
Need help?
General
