UTILEV UT25C - Page 12



66
Hour MeterHour Meter
This meter measures the time that the ignitionThis meter measures the time that the ignition
switch is energized, not just engine run time. Useswitch is energized, not just engine run time. Use
meter to schedule lubrication and maintenancemeter to schedule lubrication and maintenance
periods.periods.
Engine Coolant TemperatureEngine Coolant Temperature
This gauge indicates the Engine Coolant Temperature.This gauge indicates the Engine Coolant Temperature.
Under normal conditions, the indicator is in greenUnder normal conditions, the indicator is in green
zone. (60°Czone. (60°C --115°C)115°C)
CautionCaution
：：

If the indicator is in the red zone, stop theIf the indicator is in the red zone, stop the
truck immediately. Decrease engine speed totruck immediately. Decrease engine speed to
allow the engine to cool. Check engineallow the engine to cool. Check engine
coolant level and inspect the fan belt.coolant level and inspect the fan belt.
Fuel GaugeFuel Gauge
The gauge indicates the fuel level in the tankThe gauge indicates the fuel level in the tank
when the key is in thewhen the key is in the
┃┃
(ON) position.(ON) position.
00
 00
00
00
00
1/10h1/10h
https://www.forkliftpdfmanuals.com/