(Pneumatic)(Pneumatic)
1. Since the forklift truck needs tires that have a high1. Since the forklift truck needs tires that have a high
inflation pressure to carry heavy loads, even a smallinflation pressure to carry heavy loads, even a small
bending of rims or damage at the tread surface couldbending of rims or damage at the tread surface could
cause an accident.cause an accident.
2. When using an air compressor, first adjust the air2. When using an air compressor, first adjust the air
pressure of the compressor. Failure to do so willpressure of the compressor. Failure to do so will
cause a serious accident, since the compressorcause a serious accident, since the compressor
delivers the maximum pressure.delivers the maximum pressure.
3. All nuts and bolts should be properly installed and3. All nuts and bolts should be properly installed and
tightened before inflating tire and rim assembly. Antightened before inflating tire and rim assembly. An
inflated tire contains potentially explosive energy. DOinflated tire contains potentially explosive energy. DO
NOT overinflate.NOT overinflate.
(Pneumatic tires only)(Pneumatic tires only)
Tire Pressure GB/T2982-2001:Tire Pressure GB/T2982-2001:
Truck typeTruck type Front wheelFront wheel Rear wheelRear wheel
2.0T2.0T--2.5T2.5T 860kPa860kPa 860kPa860kPa
3.0T3.0T--3.5T3.5T 830kPa830kPa 790kPa790kPa
5.2 Weekly Maintenance5.2 Weekly Maintenance
Increase the below content based on dailyIncrease the below content based on daily
maintenance.maintenance.
1. Air Filter1. Air Filter
Perform maintenance on the air cleaner after 50Perform maintenance on the air cleaner after 50--
250 hours of operation.250 hours of operation.
Replace the filter element as neededReplace the filter element as needed
!! CCaauuttiioonn
If the worksite has poor air quality the air filterIf the worksite has poor air quality the air filter
needs to be clneeds to be cleaned or replaced eaned or replaced more frequentlymore frequently..
To Next Page
Loading...
