EasyManua.ls Logo

UTILEV UT25C - Forklift Operation after Long

Default Icon
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6868
8.3 Forklift Operation after Long8.3 Forklift Operation after Long--
Term StorageTerm Storage
11
Remove the antirust oil from the exposed parts.Remove the antirust oil from the exposed parts.
22
Vent the gear oil of the crankcase, driving axle,Vent the gear oil of the crankcase, driving axle,
transmission box (clutch type), hydraulic transmissiontransmission box (clutch type), hydraulic transmission
box (torque converter type) clear it and add with newbox (torque converter type) clear it and add with new
gear oil.gear oil.
33
Clean the hydraulic oil reservoir and fuelClean the hydraulic oil reservoir and fuel
reservoir (removing any dirt or water) and add withreservoir (removing any dirt or water) and add with
new hydraulic oil/fuel.new hydraulic oil/fuel.
44
Check the clearance of the valve, gas valve capCheck the clearance of the valve, gas valve cap
and other parts on the engine.and other parts on the engine.
55
Add antifreeze or water to the required level.Add antifreeze or water to the required level.
66
Install the Install the batterybattery..
77
Check basic truck functions like starting, running,Check basic truck functions like starting, running,
turning, lifting etc.turning, lifting etc.
88
WarmWarm--up the truck.up the truck.
https://www.forkliftpdfmanuals.com/

Related product manuals