114114
The operation of cab:The operation of cab:
（（
11
））
Open left door with key, enter into cab.Open left door with key, enter into cab.
（（
22
））
Close door, make sure left and right doors are closed before beginning work.Close door, make sure left and right doors are closed before beginning work.
（（
33
））
The glass of left and right door can be moved by draw button on the glass.The glass of left and right door can be moved by draw button on the glass.
（（
44
））
The rear door can be opened by loosening lock buckle.The rear door can be opened by loosening lock buckle.
Disassembling cab:Disassembling cab:
（（
11
））
Stop the truck on solid and smooth level ground; close switch , pull down hand brake.Stop the truck on solid and smooth level ground; close switch , pull down hand brake.
（（
22
））
Remove 4 bolts from left front and right front legs. For high position exhaust, the fastening bolts should beRemove 4 bolts from left front and right front legs. For high position exhaust, the fastening bolts should be
removedremoved
（（
33
））
Pull out 4 rubber plugs from left rear and right rear legs, remove 4 bolts from left rear and right rear legs.Pull out 4 rubber plugs from left rear and right rear legs, remove 4 bolts from left rear and right rear legs.
（（
44
））
Using a crane, Using a crane, lift the cab lift the cab slightlyslightly..
（（
55
））
Disconnect wiring at switches for fan, wiper, alarm, lights etc. Place Disconnect wiring at switches for fan, wiper, alarm, lights etc. Place any trailing wires inside cab support any trailing wires inside cab support legs.legs.
（（
66
））
Put down cab slowly and lPut down cab slowly and lightlyightly, avoid crushing , avoid crushing wires.wires.
Installing cab:Installing cab:
The installation procedure is the reverse of the removal procedure. But remove the bolts which connect headThe installation procedure is the reverse of the removal procedure. But remove the bolts which connect head
frame and support legs, after fastening support legs and truck body, then fasten connected bolts connected headframe and support legs, after fastening support legs and truck body, then fasten connected bolts connected head
frame and support legs, fasten torque of bolts connected support legs and truck body: T=137frame and support legs, fasten torque of bolts connected support legs and truck body: T=137--167 N·m. bolts for167 N·m. bolts for
connecting head frame and support connecting head frame and support legs: T=1legs: T=11010--140 N·m140 N·m
To Next Page
Loading...
