116116
Seat Belt Protection:
Seat Belt Protection:
If the truck is equipped with the Operator Presence Sensing System with an interlock seat belt, disconnecting the seatIf the truck is equipped with the Operator Presence Sensing System with an interlock seat belt, disconnecting the seat
belt buckle will have the same effect as leaving the seat, which is described in the sections above.belt buckle will have the same effect as leaving the seat, which is described in the sections above.
WARNINGWARNING
If the OPS system is activated by the operator leaving the seat or disconnecting the seatIf the OPS system is activated by the operator leaving the seat or disconnecting the seat
belt while traveling on a slope, the truck may roll on the slope when the engine is disabled. Tobelt while traveling on a slope, the truck may roll on the slope when the engine is disabled. To
avoid this, the driver must remain seated with the seatbelt fastened.avoid this, the driver must remain seated with the seatbelt fastened.
Hydraulic Function Hydraulic Function ProtectioProtection:n:
If the operator is not seated properly while the engine is running, the hydraulic functions (lift, lower, tilt, and auxiliaryIf the operator is not seated properly while the engine is running, the hydraulic functions (lift, lower, tilt, and auxiliary
functions) will be disabled. If the operator returns to the seat properly, the hydraulic functions will begin working. If thefunctions) will be disabled. If the operator returns to the seat properly, the hydraulic functions will begin working. If the
driver leaves the seat for more than 3 seconds, the hydraulic functions will be disabled.driver leaves the seat for more than 3 seconds, the hydraulic functions will be disabled.
Park Brake Protection:Park Brake Protection:
a. If the operator fails to sit on the seat properly while the forklift is running and the park brake is not engaged, the alarma. If the operator fails to sit on the seat properly while the forklift is running and the park brake is not engaged, the alarm
will sound after 3 seconds and the OPS light will illuminate. Pulling up the parking brake or sitting on the seat correctly willwill sound after 3 seconds and the OPS light will illuminate. Pulling up the parking brake or sitting on the seat correctly will
cancel the alarm.cancel the alarm.
b. If the park brake is not engaged when the driver leaves the seat without the engine running but the key switch is on, theb. If the park brake is not engaged when the driver leaves the seat without the engine running but the key switch is on, the
alarm will sound and the OPS light will illuminate. Engaging the parking brake or returning to the seat properly will turn offalarm will sound and the OPS light will illuminate. Engaging the parking brake or returning to the seat properly will turn off
the OPS light, the parking brake light, and the alarm.the OPS light, the parking brake light, and the alarm.
Abnormal Function:Abnormal Function:
In the event the OPS system exhibits any of the following symptoms, park the forklift immediately in a safe place andIn the event the OPS system exhibits any of the following symptoms, park the forklift immediately in a safe place and
contact an authorized service technician.contact an authorized service technician.
a. a. The The alarm alarm keeps keeps sounding sounding when when the parthe park k brake brake is appis applied.lied.
b. b. The neutral The neutral indicator indicator light flashlight flashes wes when the hen the gear swgear switch is itch is in neutralin neutral..
c. c. The OPS The OPS light does not illumilight does not illuminate or the alarm nate or the alarm does not sdoes not sound 3 seconds ound 3 seconds after the operator after the operator leaves the sleaves the seat or disconneat or disconnectsects
the seat belt.the seat belt.
d. d. The alarm The alarm keeps sokeeps sounding or the unding or the OPS light OPS light stays illuminated stays illuminated after the operator after the operator returns to returns to the seat the seat properly.properly.
Note: Seat switch, parking brake switch, buzzer, alarm lights, and other lights Note: Seat switch, parking brake switch, buzzer, alarm lights, and other lights are powered by battery and turning on are powered by battery and turning on key.key.
To Next Page
Loading...
