126126
5. Keep holding the lock catch 5. Keep holding the lock catch up, and push up tensionerup, and push up tensioner
device until it touches cylinder.device until it touches cylinder.
6. Keep the lock catch out and pull downward the whole6. Keep the lock catch out and pull downward the whole
tensioner device Then buckle belt is loosened from tensitensioner device Then buckle belt is loosened from tensioneroner
device.device.
Remove Cylinder and ChargeRemove Cylinder and Charge
NoticeNotice
：：
a) 1 # may use more than -20°Ca) 1 # may use more than -20°C
b) 2 # may use more than -10°Cb) 2 # may use more than -10°C
c) 3 # may use more than 0°C.c) 3 # may use more than 0°C.
CautionCaution
1. Avoid banging cylinder against truck when removing.1. Avoid banging cylinder against truck when removing.
2. Make sure the outlet shut-off valve is closed.2. Make sure the outlet shut-off valve is closed.
3. Only take the empty cylinder to authorized charging location.3. Only take the empty cylinder to authorized charging location.
To Next Page
Loading...
