1515
Steering Wheel [8]Steering Wheel [8]
The steering wheel is operated in theThe steering wheel is operated in the
conventional manner, that is, when the wheel is turnedconventional manner, that is, when the wheel is turned
right, the truck will turn to the right; when the wheel isright, the truck will turn to the right; when the wheel is
turned left, the truck will turn the left. The steer wheelsturned left, the truck will turn the left. The steer wheels
are located at the rear of the truck. These cause theare located at the rear of the truck. These cause the
rear of truck to swing out when a turn is made.rear of truck to swing out when a turn is made.
WARNING:WARNING:
This truck is provided with the power steering, soThis truck is provided with the power steering, so
heavy handheavy hand--wheel operation is caused when thewheel operation is caused when the
engine comes to a stall. To put the power steering inengine comes to a stall. To put the power steering in
operation again, restart the operation again, restart the engine without delay.engine without delay.
Inching Pedal [9]Inching Pedal [9]
Depress the pedal partially to decrease hydraulicDepress the pedal partially to decrease hydraulic
oil pressure. Use inching pedal for Forklift loading andoil pressure. Use inching pedal for Forklift loading and
unloading, and when slow speed is required. Whenunloading, and when slow speed is required. When
pedal is depressed all the way, forklift will slow to apedal is depressed all the way, forklift will slow to a
stop.stop.
CAUTIONCAUTION
Do not use the inching pedal too much, as it willDo not use the inching pedal too much, as it will
cause transmission oil temperature to rise and thecause transmission oil temperature to rise and the
clutch to slip.clutch to slip.
Brake Pedal [10]Brake Pedal [10]
Depress the pedal partially to slow vehicle motion.Depress the pedal partially to slow vehicle motion.
Depress it fully to bring vehicle to a stop. Release theDepress it fully to bring vehicle to a stop. Release the
pedal to resume vehicle motion.pedal to resume vehicle motion.
CAUTIONCAUTION
To Next Page
Loading...
