2020
Seat SwitchSeat Switch
While sitting in the seat and wearing the safety belt,While sitting in the seat and wearing the safety belt,
ensure your back and waist are as close to the seatensure your back and waist are as close to the seat
back as much as possible.back as much as possible.
Check the bolts which attach the safety belt to theCheck the bolts which attach the safety belt to the
truck for tightness. DO NOT tie safety belt in a knot.truck for tightness. DO NOT tie safety belt in a knot.
Do not let belt press on hard or fragile objects. AvoidDo not let belt press on hard or fragile objects. Avoid
letting safety belt come in contact with sharp edgesletting safety belt come in contact with sharp edges
that may result in tearing or fraying of the belt. Do notthat may result in tearing or fraying of the belt. Do not
tilt the seat back too much; otherwise the safety belttilt the seat back too much; otherwise the safety belt
may not be able to be latched.may not be able to be latched.
DO NOT remove safety belt components. AlwaysDO NOT remove safety belt components. Always
inspect safety belt before using. If safety belt isinspect safety belt before using. If safety belt is
damaged or unusable, replace with new belt. Safetydamaged or unusable, replace with new belt. Safety
belt can be used for 3 to 5 years under normal use.belt can be used for 3 to 5 years under normal use.
Replace safety belt sooner if damaged.Replace safety belt sooner if damaged.
Overhead GuardOverhead Guard
DO NOT operate forklift without the overheadDO NOT operate forklift without the overhead
guard. It is designed to protect the operator from fallingguard. It is designed to protect the operator from falling
objects and meets the safety standard.objects and meets the safety standard.
HoodHood
The hood can be fully opened to provide easyThe hood can be fully opened to provide easy
access when performing maintenance. The hood canaccess when performing maintenance. The hood can
be easily lifted with the aid of a hood damper. To lockbe easily lifted with the aid of a hood damper. To lock
the hood, push down on the front of hood until itthe hood, push down on the front of hood until it
latches.latches.
CautionCaution
Before opening the hood, the hood releaseBefore opening the hood, the hood release
knob should be pulled out first.knob should be pulled out first.
Use caution not to catch your fingers in theUse caution not to catch your fingers in the
hood while closing it.hood while closing it.
Warning:Warning:
While performing maintenance under theWhile performing maintenance under the
hood, the engine must be off to avoid injury tohood, the engine must be off to avoid injury to
hands or other body parts. The engine can behands or other body parts. The engine can be
running in order to troubleshoot somerunning in order to troubleshoot some
problems, however, DO NOT place bodyproblems, however, DO NOT place body
under hood while it is running.under hood while it is running.
To Next Page
Loading...
