2828
22.22.The work surface should be solid and level such asThe work surface should be solid and level such as
a cement road, asphalt or concrete road surface.a cement road, asphalt or concrete road surface.
The truck is designed to operate under theThe truck is designed to operate under the
following climactic conditions:–20following climactic conditions:–20
°°
C — 50C — 50
°°
C; windC; wind
speed is lower than 5m/s; air relative humidity is lessspeed is lower than 5m/s; air relative humidity is less
than 90%.than 90%.
Inspect the surface over which truck will operate.Inspect the surface over which truck will operate.
Inspect for holes, dropInspect for holes, drop--offs, obstacles, and roughoffs, obstacles, and rough
spots. Look for anything that might cause you to losespots. Look for anything that might cause you to lose
control of the truck, or cause the truck to bog down orcontrol of the truck, or cause the truck to bog down or
turn over.turn over.
Clear away trash and debris. Pick up anything thatClear away trash and debris. Pick up anything that
might puncture the tires or cause the load to becomemight puncture the tires or cause the load to become
unbalanced.unbalanced.
Slow down when driving on wet and slipperySlow down when driving on wet and slippery
roads. Stay away from the shoulder of the road. If youroads. Stay away from the shoulder of the road. If you
have to drive on the shoulder, use extreme caution.have to drive on the shoulder, use extreme caution.
Rugged surfaces cause truck vibration and noise.Rugged surfaces cause truck vibration and noise.
The high air pressure of the tires will cause vibrationThe high air pressure of the tires will cause vibration
and noise as well.and noise as well.
DO NOT operate the truck during inclementDO NOT operate the truck during inclement
weather, such as wind storms, thunder storms, snow,weather, such as wind storms, thunder storms, snow,
etc.etc.
To Next Page
Loading...
