Uwatec Aladin Series User Manual

SCUBAPRO.COM
• (10) The status of the software upload is shown on the display with a progress bar.
Note: Keep the dive computer near your mobile device while the software update is loading.
• (9) Once the software file has been selected, the update will start.
After successful software upload your dive computer starts the reprogramming automatically. Once the new
software has been programmed, the dive computer will complete a few internal checks and finally perform a
reboot.
ALADIN MATRIX: A double press-and-hold of the right button exits this screen and enters the “Time and date”
display.
A1 and A2: A short press of the SEL/ESC button exits this screen and enters the “Time and date” display.

Uwatec Aladin Series Specifications

General

Display	LCD
Audible Alarms	Yes
Depth Rating	Varies by model (see specific model)
Battery Type	CR2032 lithium battery
Logbook Memory	Varies by model
Nitrox Compatibility	Yes (varies by model)
Ascent Rate Indicator	Yes
Altitude Adjustment	Automatic
Model	Aladin Series (multiple models)
Type	Dive computer
Max Depth	Varies by model (e.g., 60m, 100m)
Battery Life	Varies by model