Uwatec A700 User Manual

A700 Step-
by-step
maintenance
procedures.
Refer to schematic for
part identification.
Rene' Dupre' - Technical Training
Manager – 8/2009 Copyright,
Modified 7/2010
Important note: The following information is not designed to be a complete training guide for servicing the listed SCUBAPRO
regulators. All SCUBAPRO technicians are required to attend an annual service training program to insure safe handling and
servicing of SCUBAPRO products. All SCUBAPRO technicians must be employed by an authorized SCUBAPRO facility.

Uwatec A700 Specifications

General

Brand	Uwatec
Model	A700
Category	Diving Instrument
Language	English

Summary

A700 Second Stage Maintenance Overview

Introduction and Schematic Diagram

Provides an introduction to the A700 second stage and a schematic for part identification.

Required Tools and Parts List

Lists essential tools and components needed for servicing the SCUBAPRO A700 regulator.

Disassembly and Component Removal Steps

Detailed step-by-step instructions for safely disassembling the A700 second stage regulator.

Cleaning and Inspection Procedures

Guidelines for cleaning regulator components using ultrasonic cleaners and inspecting for damage.

A700 Second Stage Reassembly

Mouthpiece and Exhaust T Installation

Instructions for installing the mouthpiece, support, and exhaust T into the regulator body.

Poppet and Seat Assembly

Steps for assembling the poppet, spring, and balance chamber with the LP seat.

Adjustment Shaft and Dive Switch Integration

Guidance on assembling the adjustment shaft, micro-adjust, and dive switch components.

Final Cover and Diaphragm Placement

Procedures for aligning and securing the front cover and diaphragm onto the regulator case.

A700 Air Adjustments and Testing

Connecting Adjustment Tools

Instructions for connecting inline adjustment tools for intermediate pressure air charging.

Setting Inhalation Effort

Procedures for adjusting inhalation effort using micro-adjust and testing with gauges.

Water Testing and Stability Verification

Guidance on testing the regulator in water for leaks and verifying stability in various positions.