(b) decrease value in function setup
5. LO INDICATOR
This indicator appears to indicate the weight detected
below the low limit set (Weight check function)
6. OK INDICATOR
This indicator appears to indicate the weight detected
within the high and low limit range (Weight check
function)
7. HI INDICATOR
This indicator appears to indicate the weight detected
above the high limit set (Weight check function)
8. AVOIRDUPOIS WEIGHT UNITS INDICATOR
This indicator appears to indicate the weight being is
avoirdupois weight units (lb). Two avoirdupois weight
units are available, i.e. decimal pound (e.g. 5.62 means
5.62 lb) and pound/ounce (e.g. 2.15.01 means 2 lb and
15.1 ounce).
9. ZERO INDICATOR
This indicator appears to indicate a zero weight status
To Next Page
Loading...