6. TROUBLE SHOOTING
Syndrome Scale cannot be turned on
Check: Is the scale charged?
Action: Recharge the scale for at least 8 hours
before first time use or plug in the power
adaptor before power on the scale.
Check Is the power adaptor inserted properly into
both the electricity outlet and the DC inlet
of scale.
Action: Secure both ends of the power adaptor and
try again.
Syndrome Scale turned off automatically
Check Is Auto Power Off Function employed?
Action Refer to 4.2.2 to disable Auto Power Off
Function.
Check Is the LO-BAT INDICATOR on?
Action Apply the power adaptor.
Syndrome Rated capacity cannot be reached
Check Is the NET INDICATOR on?
Action: Turn the scale off. Remove all loads from
platter and turn on again.
To Next Page
Loading...