5.6 Tare off the Weight of a Container
When a container is used, follow the below steps
to tare off the weight of the container and
get the net weight.
a. Remove all loads away from platter
b. Make sure that the ZERO INDICATOR is on.
c. Place the container on the platter.
d. Press TARE.
After TARE is pressed, the TARE INDICATOR would
appear.
Refer to 5.2 for weighing procedures. Weight
displayed under is the net weight of the subject
matter. Refer to SPECIFICATIONS for maximum
tare range.
5.7 Clear the TARE Function
Remove all loads from platter then press TARE.
After TARE is pressed, the TARE INDICATOR would
disappear.
5.8 Recharge the Scale
The scale is equipped with a built-in
rechargeable battery. When the LO-BAT
INDICATOR appears, recharge the scale
immediately. Failure to do so may cause
unrecoverable damage to the rechargeable
battery.
The scale can remain in operation when being
recharged.
Charging is completed when the color of the
IN-CHARGE INDICATOR turns green.
To Next Page
Loading...
