To Next PageTo Next Page
Need help?Do you have a question about the UWE DW-15KE and is the answer not in the manual?
Lists all accessories included with the electronic weighing scale.
Instructions for attaching the plastic platter using the provided screw and cap.
Guidance on placing the stainless steel platter onto the assembled plastic platter.
Steps for powering on the scale, including voltage check for the adaptor.
Function of the ON/ZERO key for scale power, zeroing, and cursor movement.
Function of the TARE key for zeroing containers and decreasing values.
Function of the MODE key for shifting weight units and increasing values.
Procedure to turn off the scale using the OFF key.
Description of the in-charge indicator colors for battery status.
Explanation of the ZERO indicator for zero weight status.
Indicator signifying the tare function is active and displaying net weight.
Indicator for low battery status, requiring immediate recharge to prevent damage.
Indicator for the scale being in standby mode for power saving.
Indicator for weight detected above the high limit set in weight check function.
Indicator for weight detected within the high and low limit range.
Indicator for weight detected below the low limit set in weight check function.
Indicator for avoirdupois weight units (lb), decimal pound or pound/ounce.
Instructions for placing the scale correctly on a level surface for accurate weighing.
Access internal settings for display segment check, auto power off, RS-232, and data transmission.
Essential checks before weighing, including platter setup, scale leveling, and zero indicator.
Procedures for placing objects gently, automatic weight display, and post-weighing practices.
How to switch between metric and avoirdupois weight units.
Description of the power saving feature that turns off display during stable weights.
How to set the display to zero (or clear non-zero values) when no load is present.
Manual procedure to tare off container weight for net weight measurement.
How to cancel the tare effect, automatically or manually.
Overview of the weight check function with audio/video signals for results.
How to perform a weight check and interpret the HI, OK, and LO indicator results.
Instructions for cleaning the scale using soft cloths and mild detergent.
Prohibits harsh, abrasive materials, solvents, and alcohol for cleaning.
Periodic verification of scale accuracy and recalibration if needed.
Guidance on dust cover, horizontal placement for transport/storage, and clean storage.
General
