UWE PS SERIES - User Manual

CONTENTS
1. INSTALLATION
2. SPECIFICATIONS
3. KEYBOARD LAYOUT AND DESCRIPTION
4. INITIAL SETUP
5. INSTRUCTION FOR USE
6. TROUBLE SHOOTING
7. DAILY CARE AND MAINTENANCE
APPENDIX
Installation Diagram
Installation Procedures
DECEMBER 1999
Specifications subject to change without prior notice
PS SERIES
All STAINLESS STEEL BENCH SCALE
OPERATION MANUAL
PLEASE READ THIS MANUAL VERY CAREFULLY BEFORE
ATTEMPT TO OPERATE THE SCALE
This document hosted by: www.oldwillknottscales.com

Summary

Installation

Accessories Check

Verify all included accessories before proceeding with installation.

Scale Installation

Follow detailed instructions for careful scale installation and refer to diagrams.

Powering On the Scale

Ensure correct voltage and charge the scale before first use.

Keyboard Layout and Description

LO-BAT INDICATOR

Initial Setup

Placing the Scale

Place scale on a hard, level surface free from interference.

Select Weight Unit

Steps to enable or disable avoirdupois weight units.

Instruction for Use

Before Weighing

Ensure platform cover is secure and scale is on a level surface.

Weighing

Proper procedure for placing objects and reading weight.

Recharge the Scale

How to recharge the scale when the low battery indicator appears.

Trouble Shooting

Scale Cannot Be Turned On

Check charging and power adapter connection if scale won't turn on.

Scale Turned Off Automatically

Rated Capacity Cannot Be Reached

Scale Displays 00000

Weighing Result Is Not Accurate

Ensure scale is level, away from disturbances, and correctly calibrated.

UWE PS SERIES Specifications

General

Brand	UWE
Model	PS SERIES
Category	Scales
Language	English