5.8 Weight Memory Function
a. To save a weight to memory and auto
weight accumulation
When weight display is stable, press M+ to
save the weight into memory. Scale displays
P. 1 and M+ INDICATOR indicating total number
of entry and the memory is containing data.
b. Recall accumulated weight in memory Press
MR. Scale will display the total number of
entry and the total accumulated weight of
all entries.
c. Clear data in memory
Press MC after the accumulated weight is
being displayed. Scale will display P.0 to
indicate all data in memory has been erased.
Caution
All data stored in memory will be erased if:
a. The scale is turned off, or,
b. The weight unit is changed.
5.9 Recharge the Scale
The scale is equipped with a built-in
rechargeable battery. When LO-BAT INDICATOR
appears, recharge the scale immediately.
Failure to do so may cause unrecoverable
damages to the built-in rechargeable battery.
The scale can remain in operation when being
recharged.
Charging is completed when the color of the
IN-CHARGE INDICATOR turns green.
Caution:
Insert the rubber cap into the DC inlet of scale
except during recharging.
To Next Page
Loading...
