UWE PS SERIES - Initial Setup; Placing the Scale; Select Weight Unit

I
f
r
e
q
u
ired, adjust the adjustable feet
underneath scale to obtain a level
position.
d. Press TARE twice
e. Scale displays F.3
f. Press and hold MODE until kg or lb
sign appears.
g. Press MODE to shift between kg and
lb sign.
h. To enable the avoirdupois units,
press ZERO when the lb sign appears.
i. To disable the avoirdupois units,
press ZERO when the kg sign appears.
j. After ZERO is pressed, the scale
will return to operation status.
4.2 Internal Setting
4.2.1 Select weight unit
The scale is equipped with metric and
avoirdupois weight units. Follow the below
steps to enable/disable the avoirdupois
units.
a. Turn scale off
b. Press and hold TARE, then press
ON/OFF
c. Scale displays F.1
4.2.2 Select Auto Power Off Setting
The scale is equipped with Auto Power Off
Function. The scale will be turned off
automatically if it is not used for 4 minutes.
Follow the below steps to enable/disable
the Auto Power Off Function
a. Turn scale off
b. Press and hold TARE, then press ON/OFF
c. Scale displays F.1
d. Press TARE three times
4. INITIAL SETUP
4.1 Placing the Scale
Place the scale on a hard and strong surface,
where is free from RF interference,
vibration, fire and direct sunlight. For
accurate weighing, always place this unit
on a level surface.