To Next PageTo Next Page
Need help?Do you have a question about the UWE DW-6000E and is the answer not in the manual?
Verifying the inclusion of all necessary accessories before installation.
Steps for correctly attaching the plastic and stainless steel platters.
Instructions on how to safely power on the scale, including voltage checks.
Details on the ON/ZERO key's functions for turning on, zeroing, and setup.
Explanation of the TARE key for zeroing containers and adjusting values.
How to use the MODE key to change units and adjust values.
Operation of the OFF key to power down the scale.
Description of various indicator lights like In-Charge, Zero, Tare, and LO-BAT.
Guidance on positioning the scale on a level, stable surface for accuracy.
Procedure to verify the functionality of the scale's display segments.
Configuration options for the automatic power-off feature.
Settings for serial communication, including baud rate and protocol.
Selection of transmission modes for data output.
How to enable or disable the automatic tare function for weighing.
Pre-weighing checks and preparations for accurate results.
Step-by-step guide on how to place objects and obtain weight readings.
How to switch between metric and avoirdupois weight units.
Explanation of the power saving feature and its display behavior.
Method to reset the display to zero when the scale is unloaded.
Manual process to remove the weight of a container before measuring net weight.
How to cancel any previously applied tare weights.
Overview of the function that checks weights against set limits.
Procedure to configure high and low weight limits for checks.
How the scale indicates results during a weight check.
Instructions for charging the built-in rechargeable battery.
Guidelines for cleaning the scale using soft cloths and mild detergent.
Prohibits the use of harsh abrasives or solvents for cleaning.
Recommendation to periodically verify and re-calibrate scale accuracy.
Suggests using a dust cover during operation for better protection.
Ensures scale is placed horizontally during transportation or long storage.
Instruction to remove the platter before transportation or long-term storage.
Recommendation to store the scale in a dry and clean environment.
General
