UWE DW-6000E - KEYBOARD LAYOUT AND DESCRIPTION; ON;ZERO KEY Function; TARE KEY Function; MODE KEY Function

3. KEYBOARD LAYOUT AND DESCRIPTION
1. ON/ZERO KEY
Press this key to: (a) turn scale on or reset display
value to zero; (b) move cursor to the right in function
setup
2. TARE KEY
Press this key to: (a) tare off the weight of a container;
(b) decrease value in function setup
3. MODE KEY
Press this key to: (a) shift among different weight units;
(b) increase value in function setup
4. OFF KEY
Press this key to turn scale off
5. IN-CHARGE INDICATOR
Red color: Recharging battery
Green color: Charging completed
6. ZERO INDICATOR
This indicator appears to indicate a zero weight status
7. TARE INDICATOR
This indicator appears to indicate the tare function
is in operation and weight displayed is net weight
8. LO-BAT INDICATOR
When this indicator appears, recharge the scale
immediately. Failure to do so may cause unrecoverable
damage to the rechargeable battery inside scale
9. STANDBY INDICATOR
This indicator appears to indicate scale is in standby
mode (power saving function)
10. HI INDICATOR
This indicator appears to indicate the weight detected
above the high limit set (Weight check function)