V-Tec DT607 User Manual

USER MANUAL
DT-ENG-DT607-V1 / 201607
• Please read this manual carefully to ensure safe and correct operation.
• Keep this manual well for future reference.
RF CARD
RF CARD
RF CARD
RF CARD
RF CARD
RF CARD
DT607A/ID-S4DT607/ID/FE-S1 DT607/ID/FE-S2
DT607F/ID/FE-S4DT607/ID/FE-S3 DT607/ID/FE-S4
DT607 Series
2 WIRE SYSTEM
Fisheye door station with proximity access control

V-Tec DT607 Specifications

General

Type	DVR
Channels	4
Compression	H.264
Operating System	Embedded Linux
Network Interface	RJ45
Video Output	VGA

Summary

PARTS AND FUNCTIONS

Part Names

Identifies and labels all components of the surface and flush mounted door stations.

Mounting

Provides step-by-step instructions for installing the surface and flush mounted door stations.

Terminal Description

Details the function of each terminal on the door station, including jumpers and ports.

BASIC FUNCTIONS

Unlock Operations

Explains how to unlock the door using an ID card and the expected indicator feedback.

SETUP INSTRUCTIONS

Functions Setting Up

Provides a table detailing various settings, their ranges, and default values.

Setting Door Station Address

Explains how to configure the unique address for up to four door stations.

Setting Door Station Calling Mode

Describes the two calling modes (Standard/Group) and how to set them.

Setting Camera Resolution

Setting Unlock Mode

Setting Unlock Time

Registering ID Card

Explains how to register up to 320 user cards and the role of master cards.

Switching Access Control

Details how to switch access control between door station and DT-ACC.

Adding User Cards

Deleting User Cards

Initializing Access