V2 Gold Series User Manual

Gold400D / Gold600D
I
L n. 267-1
EDIZ. 28/09/2009
V2 S.p.A.
Corso Principi di Piemonte, 65/67
12035 RACCONIGI (CN) ITALY
tel. +39 01 72 81 24 11 - fax +39 01 72 84 050
info@v2home.com - www.v2home.com
ATTUATORE ELETTROMECCANICO 230V / 120V IRREVERSIBILE A
CREMAGLIERA PER CANCELLI SCORREVOLI FINO A 600 /400 KG
DI PESO. CENTRALE DI COMANDO DIGITALE INCORPORATA
230V / 120V ELECTRO-MECHANICAL IRREVERSIBLE RACK
ACTUATOR FOR SLIDING GATES UP TO 600 /400 KG.
BUILT-IN DIGITAL CONTROL UNIT
OPERATEUR ELECTROMECANIQUE 230V / 120V IRREVERSIBLE
A CREMAILLERE POUR PORTAILS COULISSANTS JUSQU'A
600 /400 KG DE POIDS. ARMOIRE DE COMMANDE NUMÉRIQUE
INCORPORÉE
MOTORREDUCTOR ELECTROMECÁNICO 230V / 120V
IRREVERSIBLE A CREMALLERA PARA PUERTAS CORREDERAS
HASTA 600 /400KG DE PESO. CUADRO DE MANIOBRAS DIGITAL
INCORPORADO
I
GB
F
E

V2 Gold Series Specifications

General

Brand	V2
Model	Gold Series
Category	Garage Door Opener
Language	English

Summary

Important Remarks and Regulations

Conformity to Regulations

Technical Specifications Overview

Control Unit Description and Connections

Description of the Control Unit

Overview of the Pd8 digital control unit's features, compliance, and capabilities for gate automation.

Power Supply Connection

Photocell Connections

Safety Features and Input Configurations

Safety Ribbons

Activation Inputs

Programming with Menu Keys

Using Menu Keys for Programming

Guide to navigating the configuration menu using UP, DOWN, and MENU keys for parameter adjustments.

Function Menu Setup

Procedure for selecting and configuring functions from available options within the programming menu.

Time Menu Setup

Method for setting time durations for various gate operations and functions within the programming menu.

Value Menu Setup

Process for adjusting numerical values for parameters within the programming menu.

Configuration Procedures

Quick Configuration Guide

A streamlined procedure to set up the control unit and get the gate automation working quickly.

Self-Learning Procedure

Steps for the self-learning cycle that automatically determines optimal gate operation times.

Control Unit Configuration Steps

Detailed step-by-step procedure for setting all operational parameters of the Pd8 control unit.

Default Parameter Loading and Time Settings

Loading Default Parameters

Procedure to restore all control unit parameters to their standard or default values.

Gate Opening Time Settings

Configuration of the time duration for the gate's opening phase, with safety interruption options.

Pedestrian Gate Opening Time

Setting the shorter time duration for pedestrian access opening, adjustable up to t.AP.

Gate Closing Time Settings

Configuration of the time duration for the gate's closing phase, recommended to be longer than opening time.

Pedestrian Gate Closing Time

Setting the time duration for pedestrian access closing, adjustable up to t.CH1.

Gate Operation Parameter Adjustments

Pre-blinking Time Configuration

Setting the duration for the blinker activation before gate movement to warn of incoming motion.

Gate Direction Setting

Inverting the gate opening direction without changing motor wires or limit switch connections.

Motor Power Adjustment

Adjusting the motor power as a percentage of maximum power for optimal gate operation.

Start Off Configuration

Soft Start (Slowed Down) Function

Advanced Gate Operation Settings

Slowing Down Time Adjustment

Start Command During Opening Phase

Start Command During Closing Phase

Start Command During Pause Phase

Operation Modes and Timing Configurations

Pedestrian Start During Partial Opening

Automatic Closing Function

Closing After Transit

Pause After Transit Configuration

Input Functions and Brake Control

Start Input Function Modes

Brake Function Activation

Stop Input Functionality

Safety Device Input Configurations

Photocell 1 Input Settings

Photocell 2 Input Settings

Test of Safety Devices

Safety Ribbon 1 Input

Advanced Safety and Sensor Settings

Safety Ribbon 2 Input

End of Stroke Inputs

Anti-skid Function

Obstacle Sensor Enabling

Cycle Counting and Programming Completion

Counter Viewing and Service Alerts

Automatic Operation Time Learning

Activating a procedure to automatically find the best duration for gate operation times.

End of Programming

Cycle Counter and Service Indicators

Reading of Cycle Counter

Obstacle Detection and Operation Defects

Obstacle Sensor Operation Modes

Details on how the obstacle sensor detects and reacts to obstructions during gate motion.

Slowing Down Disabled

Slowing Down Enabled

Operation Defects and Troubleshooting

Common operational defects, their causes, and remedies for the gate automation system.

Mains LED and Overload LED Status

Troubleshooting guide for MAINS and OVERLOAD LED indicators and their associated power issues.

Error Codes and Display Messages

Interpreting error codes and display messages for diagnosing and resolving control unit issues.