EasyManua.ls Logo

V2 JEDI-1000

V2 JEDI-1000
88 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IL n. 321
EDIZ. 01/11/2013
JEDI
ATTUATORE ELETTROMECCANICO
PER PORTE SEZIONALI E BASCULANTI
ELECTROMECHANICAL ACTUATOR FOR SPRING
AND COUNTERWEIGHT BALANCED DOORS
OPERATEUR ELECTROMECANIQUE POUR PORTES
SECTIONNELLES ET BASCULANTES
MOTOR DE TECHO ELECTROMECÁNICO
PARA PUERTAS SECCIONALES Y BASCULANTES
MOTORREDUTOR ELECTROMECÂNICO PARA
PORTAS SECCIONADAS E BASCULANTES
ELEKTROMECHANISCHER STELLANTRIEB FÜR
SEKTIONALTORE UND SCHWINGTORE
ELEKTROMECHANISCHE GARAGEPOORTOPENER
VOOR SECTIONAALPOORTEN EN KANTELPOORTEN
I
GB
F
E
P
D
NL
Question and Answer IconNeed help?

Do you have a question about the V2 JEDI-1000 and is the answer not in the manual?

V2 JEDI-1000 Specifications

General IconGeneral
BrandV2
ModelJEDI-1000
CategoryGarage Door Opener
LanguageEnglish

Summary

IMPORTANT REMARKS

Safety and Operational Precautions

Critical safety warnings including door balance, obstacle detection, and user training.

INSTALLATION OF GUIDE SECTION BAR

INSTALLATION OF MOTOR ON SECTION BAR

RELEASE OF THE AUTOMATION

Manual Release Procedure

Pull the knob downwards to release automation from inside; install accessory for external release.

Safety Warning on Release

Do not use knob to open door. Warning about automatic locking and manual release necessity.

ELECTRICAL CONNECTIONS

SET-UP OF OPERATIONAL PARAMETERS

Setting the Open Limit Switch

Use keys to reach fully open position, then press key to save settings. Open limit must be set first.

Setting the Close Limit Switch

Use keys to reach fully closed position, wait 2 seconds, then press key to save settings.

Self Learning of Forces

Force Calibration Procedure

Learn forces by door movements: open, confirm, close, then save settings. Attention to motor force.

Adjusting Sensitivity

Automatic Closure Function

End Programming

Saving Programmed Settings

Exit programming and store settings by pressing and holding the key until display shows 0.

Memorising Remote Controls

Deleting Remote Controls

Related product manuals