To Next PageTo Next Page
Need help?Do you have a question about the V2 JEDI-700 and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Security | Rolling Code Technology |
| Battery Backup | No |
| Speed | 7 inches per second |
| Maximum Door Height | 7 feet |
| Remote Control | Yes |
Ensures automation complies with European safety regulations and standards like EN 60204-1.
Procedure to set the upper limit position for the door's travel.
Procedure to set the lower limit position for the door's travel.
Automatically learns and sets the force required for door operation.
Modifies the device's sensitivity to obstacles.
Activates an audible alarm when the door remains open for an extended period.
Configures the door to automatically close after a set time delay.
Alerts for scheduled maintenance based on operational cycles.
Manages door operation logic for shared access environments.
Procedure to save and exit the parameter programming mode.
Indicates the actuator is working normally and the red cam activates the micro switch.
Indicates the door encountered an obstacle.
Indicates malfunctioning of the encoder or the control unit.
Indicates the photocell intervention.
