V2 Calypso400

ATTUATORE ELETTROMECCANICO IRREVERSIBILE PER CANCELLI A BATTENTE
ISTRUZIONI D'USO E INSTALLAZIONE
IRREVERSIBLE ELECTROMECHANICAL ACTUATOR FOR LEAF GATES OPERATING AND
INSTALLATION INSTRUCTIONS
OPERATEUR ELECTROMECANIQUE IRREVERSIBLE POUR PORTAILS À BATTANT
NOTICES D’EMPLOI ET D’INSTALLATION
NICHT UMKEHRBARER ELEKTROMECHANISCHER ANTRIEB FÜR FLÜGELTORE
BEDIENUNGSANLEITUNGEN UND INSTALLATION
OPERADOR ELECTROMECANICO IRREVERSIBLE PARA CANCELAS BATIENTES
INSTRUCCIONES DE USO E INSTALACION
I
GB
F
D
E
CALYPSO
IL n.186-A
EDIZ. 30/11/2006
V2 ELETTRONICA SPA
Corso Principi di Piemonte, 65/67 - 12035 RACCONIGI (CN) ITALY
tel. +39 01 72 81 24 11 fax +39 01 72 84 050
info@remotecontrolgates.co.uk www.remotecontrolgates.co.uk

V2 Calypso400 Specifications

General

Brand	V2
Model	Calypso400
Category	Garage Door Opener
Language	English

Summary

TECHNICAL DATA

INSTALLATION LAYOUT

PREPARATORY STEPS

Essential checks before installing the gate automation system.

INSTALLATION MEASURES

ACTUATOR FIXING

WARNING: Actuator Damage Prevention

Conditions to adhere to for preventing actuator damage during installation.

CALYPSO CONNECTION AND OPERATION

EMERGENCY RELEASE

Procedure for manual operation of the gate in case of power failure.

ELECTRICAL CONNECTION TABLE

POWER AND OPERATIONAL TIME ADJUSTMENTS

Adjusting motor power and operational times using control unit trimmers.

CONTROL UNIT INDICATORS (LEDS)

Understanding the status indicated by the control unit's LEDs.

INSTALLATION AND WIRING

POWER SUPPLY AND MOTOR CONNECTIONS

Connecting the power supply and the motors to the control unit.

BLINKER AND COURTESY LIGHT WIRING

Wiring the blinker and courtesy light to the control unit.

PHOTOCELL AND SAFETY EDGE INSTALLATION

Installing photocells and safety edges for gate operation.

CONNECTION DETAILS AND INPUTS

STOP AND START INPUT CONFIGURATION

Connecting and configuring stop and start inputs for gate control.

PEDESTRIAN START AND RECEIVER SETUP

Configuring pedestrian start and installing the plug-in receiver.

EXTERNAL ANTENNA CONNECTION

Connecting the external antenna for maximum radio capacity.

PROGRAMMING THE OPERATIONAL LOGIC