11
GB
MAINTENANCE
WARNING:
DO NOT STORE OUTDOORS. STORE IN A DRY ENVIRONMENT, AWAY
FROM HAZARDOUS MATERIALS, SUCH AS TOXIC, CARCINOGENIC, FLAMMABLE, OR
EXPLOSIVE SUBSTANCES.
CAUTION:
TO PREVENT DAMAGE TO AIR MOVER, PROPERTY DAMAGE, OR
PERSONAL INJURY: DO NOT STACK MORE THAN THREE UNITS HIGH. STACK ONLY
ON A STABLE, LEVEL, EVEN SURFACE. DO NOT TRANSPORT STACKED UNITS
UNLESS THEY ARE BRACED ON ALL SIDES.
CAUTION:
DO NOT TURN ON THE AIR MOVER WHILE IT IS STACKED. THE STACKING
PEGS ARE FOR STORAGE PURPOSES ONLY.
1. Maintenance Before and After Each Use
1) Inspect the plug and the cord to ensure that it has not been damaged during operation or
between uses. If the plug or cord is damaged, do not use the air mover and replace the
damaged part immediately.
2) Check the air intake and air discharge grills and make sure they are free of blockage.
2. Cord Storage
1) Before storing the air mover, ensure the power switch is turned to the OFF position, and unplug
the unit from the power outlet.
2) Wrap the power cord around the base of the handle.
3) Use the attached cord clip to hold the cord in place.
3. Storing the Air Mover
1) To conserve space while storing multiple units, this air mover can be stacked together with
multiple additional units (Fig. 3).
2) To stack, the pegs on the intake grill on the power switch side of the unit must be inserted into
the peg receiver on the opposite side of the partner unit.
WARNING:
ENSURE THAT THE UNIT IS NEVER OPERATED WITHOUT THE INTAKE
GRILLS, AIR DISCHARGE GRILL, AND IMPELLER.
To Next Page
Loading...