11
ARY, Inc. | 5200 W 110th Street Suite 200, Overland Park, KS 66211 | VacMasterFresh.com | 800-821-7849
PRO360 Suction Vacuum Sealer | User Guide
Ò The PRO360 will not turn ON:
a. Make sure the unit is plugged into a grounded outlet.
b. Make sure the outlet is working.
c. Check the power cord for any tears or frays.
d. Check the fuse located in the power cord connecting outlet.
Ò The bag is not sealing properly:
a. Push and hold down the lid during the vacuum cycle.
b. Increase or decrease the Seal Time. A positive seal will look clear. If
the seal is spotty, incomplete, wrinkled, white or milky, cut the seal
and restart the sealing process.
c. When vacuum packaging moist / wet foods, create a second seal
above the first seal to ensure a positive seal.
d. For the best results, use VacMaster
®
bags and rolls.
Ò Loss of vacuum from the bag:
a. Check for any puncture holes in the bag. Cover any sharp item
edges with a VacMaster
®
Bone Guard sheet and vacuum package in
a new bag.
b. Check the seal and adjust the placement and/or sealing time.
Troubleshooting
To Next Page
Loading...
