9
ARY, Inc. | 5200 W 110th Street Suite 200, Overland Park, KS 66211 | VacMasterFresh.com | 800-821-7849
PRO360 Suction Vacuum Sealer | User Guide
Seal Only
To seal a bag without pulling a vacuum, use the "Seal" button on the
Control Panel.
1. Using the handle, open the lid and place the open end of the bag
across seal bar.
2. To ensure a complete seal make sure the bag is flat across the seal
bar, smoothing out any wrinkles.
3. Close and hold down the lid until the seal engages.
4. Press "Seal".
5. Once the bag is sealed, the PRO360 will beep letting you know that
the seal cycle is complete.
Vacuum Seal with Canisters
Follow these steps when using storage canisters with your
VacMaster
®
PRO360 Vacuum Sealer:
1. Place the items to be sealed in the canister. Make sure the lid of
the canister is dry and free of any food particles and debris. Do not
overfill. Leave a minimum of 1" head space between the canister
contents and the top of the canister.
2. Place the lid on top of the canister. Turn the lid knob so the arrow
points to "Vacuum".
NOTE: The lid sits on the rim of the canister until the vacuum
packaging process begins.
3. Insert one end of the Accessory Hose into the lid port and insert
the other end into the Accessory Port on the PRO360.
4. Press the "Accessory" button.
5. When the vacuum process is complete the machine will "beep".
Turn the lid knob to "Lock" position.
6. Gently twist and remove the Accessory Hose from the canister and
machine.
7. To test the vacuum, tug on the canister lid. It should not move.
8. Store the canister.
NOTE: Do not freeze the canister. Long term freezer storage in
canisters will result in a loss of vacuum.
How to Use
To Next Page
Loading...
