Vacmaster SCB0501 01 - Operation; Filling the Clean Water Tank; Using Your Machine

10
GB
1. Filling The Clean Water Tank
1) Remove the clean water tank from the side of the unit. A security latch (
①
) is positioned to
keep the clean water tank in position to avoid unintentional release. The latch will automatically
release when the tank is pulled upwards (Fig. 6).
2) Remove the clean water tank cover by releasing the clean water tank cover tab. Fill with warm
water (Max 40°C) and solution. Ensure the correct proportion of water and cleaning solution is
used by referring to the solution label (Fig. 7).
SMALL CLEANING AREA - 0.8L Liquid (
②
)
LARGE CLEANING AREA - 1.6L Liquid (
③
)
Do not exceed lling the clean water tank over the maximum ll line indicated on the clean
water tank.
CAUTION: Do not ll with water above 40°C. Do not heat water or tank in microwave.
NOTE: A 236ml bottle of solution is provided with this carpet cleaner. Ensure the solution and water
are mixed correctly. Once sample bottle is depleted, the solution can be replaced with a high-quality
carpet solution.
NOTE: The carpet solution can cause eye irritation. Wash a󰀨ected area cautiously with water for
several minutes. If irritation persists, seek medical advice. Do not ingest. Keep out of reach of children.
3) Insert the locking tabs into the slots of the clean water tank and then secure the clean water
tank cover back into place until a click is heard (Fig. 8).
4
）
Slide the clean water tank back onto the unit. The security latch will automatically secure once
the clean water tank is in position. A click will be heard when correctly installed.
2. Using Your Machine
IMPORTANT: Before using the carpet cleaner, thoroughly vacuum the area to be cleaned. Always
test a small hidden area for colourfastness and pile distortion.
Test colourfastness - Gently rub surface with a dampened white cloth containing cleaning solution.
Wait 10 minutes and check for colour removal with a white paper towel. If colour changes, do not use.
NOTE: To prevent staining, please use plastic, wax paper or aluminum foil to protect wood or
metal surfaces from possible water spray.
To protect the wooden oors underneath rugs or carpet, place protective material (e.g. plastic)
underneath them before cleaning.
NOTE: Always refer to and follow the manufactures care guidelines before using cleaning solution
and carpet cleaner.
1) Unwrap the hose and ensure a tool is attached securely.
2) Turn the quick release cord hooks to release the power cord (Fig. 9).
OPERATION