Vacmaster UC0101 - Page 22

-22-
4. Separate the primary lter from the primary lter cover.
5. Use a soft brush to brush loose debris from the primary lter then rinse with
cold water. Rinse and gently squeeze dry the primary lter. Set it aside and
allow to air dry for 24 hours.
IMPORTANT:
The lters must dry completely before reuse.
6. Place the primary lter back into the primary lter cover.
7. Place the primary lter cover with the primary lter back into the dust cup lid.
Primary Filter Cover
Primary Filter
Primary Filter
Primary Filter Cover