To Next PageTo Next PageWhat to do if my Vacmaster Vacuum Cleaner will not operate?
If your Vacmaster Vacuum Cleaner won't operate, first, check the power cord, breakers, and fuses to ensure there is a power supply. Next, verify that the filter is correctly installed against the micro-switch. Lastly, empty the collection tank and clean or replace the filters.
Why is my Vacmaster Vacuum Cleaner losing efficiency and vibrating?
Reduced efficiency and motor/speed vibration in your Vacmaster Vacuum Cleaner can be caused by a blockage in the hose or collection tank inlet, or the ash filter might be clogged. Check the hose and collection tank inlets for any blockages. Remove the filter and clean it, or install a new ash filter.
What to do if dust comes out of my Vacmaster EATC608S Vacuum Cleaner motor cover?
If dust is coming out from the motor cover of your Vacmaster Vacuum Cleaner, it's likely that the filter is damaged or installed incorrectly. Try reinstalling or replacing the filter.
General| Model | EATC608S |
|---|---|
| Category | Vacuum Cleaner |
| Type | Wet/Dry Vacuum |
| Voltage | 120V |
| Frequency | 60 Hz |
| Hose Length | 7 ft |
Procedure for safely removing and cleaning the ash vacuum's filter.
