12
REMOVING AND CLEANING THE FILTER
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Remove the power head (Fig. 2).
3. Carefully remove the lter from the collection tank (Fig. 3).
4. Clean the ash or dirt from the lter by gently tapping or brushing the ash or dirt off (Fig. 4).
MAINTENANCE
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET
BEFORE REMOVING THE POWER HEAD FROM COLLECTION TANK.
IMPORTANT! CLEANING SHOULD NOT BE DONE INDOORS IN LIVING AREAS. FOR
OPTIMAL PERFORMANCE A NEW FILTER IS RECOMMENDED.
NOTICE
: Only use manufacturer approved accessories and spare parts. The use of original
accessories and original spare parts ensures that the ash vacuum can be operated safely.
1
3
2
4
To Next Page