Vacmaster EATC608S - Troubleshooting

13
TROUBLESHOOTING
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE
TROUBLE SHOOTING.
Problem Possible Cause Solution
Vacuum will not operate.
No power supply.
Check power supply-cord,
breakers, fuses.
The lter is not installed
correctly onto the micro-switch.
Check the lter assembly and
make sure it is against the
switch.
Collection tank is full.
Empty the collection tank and
clean or replace lters.
The dust comes out from the
motor cover.
The lter is damaged or
installed incorrectly.
Reinstall or replace the lter.
Reduced efciency and motor/
speed vibration.
There is a blockage in the hose,
or the collection tank inlet. The
ash lter is clogged by ne dust.
Check hose and collection tank
inlets for blockage. Take off the
lter and clean it. Or install a
new ash lter.