Operating Instructions (Continued)
10
4. Inspect the pouch
When the lid opens, remove the pouch and inspect the vacuum-packaged product.
Vacuum conrmation - Check the quality of the vacuum by looking at the tightness of the
pouch and the product. Look for air pockets or air leaks. If you notice that the product is
not vacuum sealed tightly, then increase the vacuum time by 5 seconds and vacuum and
seal again.
Seal conrmation – Inspect the pouch seal. A positive seal will appear clear upon inspec-
tion. If the seal is spotty or incomplete, increase the seal time by 0.1 second. If the seal
appears white or milky, decrease the seal time by 0.1 second. Once the settings are deter-
mined for your application, vacuum and seal again.
If the product is vacuumed and sealed tightly, then the process is complete.
To Next Page
Loading...
