VP210 Control Panel
Vacuum Gauge - Indicates the vacuum level inside the chamber.
LED Screen (TIME) - Displays current function or cycle time measured in seconds.
VACUUM Function Light - Illuminates to adjust vacuum time. During set up, adjust the vacuum
time using the buttons. Also illuminates during the vacuum process.
GAS Function Light - This model does not offer the gas ush option.
SEALING Function Light - Illuminates to adjust sealing time. During set up, adjust the sealing
time using the buttons. Also illuminates during the sealing process.
COOLING Function Light - Illuminates to adjust cooling time. During set up, adjust the cooling
time using the buttons. Also illuminates during the cooling process.
WORKING Indicator Light - Illuminates to indicate the machine is in use.
Button - Press to increase the vacuum time, sealing time or cooling time.
Button - Press to decrease the vacuum time, sealing time or cooling time.
Button - Press to stop the vacuum cycle and immediately seal the pouch. This button
will only work while the machine is in the vacuum process.
Button - Press to select the vacuum time, sealing time or cooling time. Use with the
buttons.
SET
STOP
6
To Next Page
Loading...
