Need help?Do you have a question about the Vacon CX Series and is the answer not in the manual?
General| Type | Media Converter |
|---|---|
| Model | CX Series |
| Power Supply | 24 VDC |
| Protocols | EtherNet/IP |
| Connectors | RJ45 |
| Weight | 0.2 kg |
Overview of the Modbus protocol for industrial communication and control.
Details the structure and format of Modbus RTU frames used for communication.
Lists and explains the Modbus function codes supported by the Fieldbus board for Vacon CX.
Explains mechanisms for detecting communication errors in Modbus, including CRC.
Describes how slaves handle errors and inform the master via exception responses and codes.
Step-by-step guide for physically installing the Fieldbus board into the frequency converter.
Illustrates the physical layout of terminals and connectors on the Fieldbus board.
Details the wiring and pin assignments for the Modbus D-sub connector.
Describes the terminal connections for digital inputs, outputs, and other control signals.
Procedure for initial testing of the drive application and Fieldbus control.
Commands and expected responses for controlling the Vacon CX via Modbus master software.
Overview of Modbus function codes used for Vacon CX control and monitoring.
Explains direct control of Vacon CX using specific function codes and addresses.
Details how to read and write Vacon parameters and variables using Modbus.
Illustrates the layout of the small Modbus board for Vacon CXS/CX2110PT.
Details the screw connector terminals for Modbus communication on the small board.
Step-by-step guide for installing the CX211OPT option board in Vacon CXS drives.
To Next Page
