Vacon NX OPTCP - 3 Installation; Installing the Ethernet Option Board in a Vacon NX Unit

8 • vacon Installation
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
2
3.
INSTALLATION
3.1. Installing the Ethernet Option Board in a Vacon NX Unit
!
NOTE
MAKE SURE THAT THE FREQUENCY CONVERTER
IS SWITCHED OFF
BEFORE
AN OPTION OR FIELDBUS BOARD IS CHANGED OR ADDED!
A
Vacon NX frequency converter.
B
Remove the cable cover.
C
Open the cover of the control unit.