Figure 4-2. Pricipal drawing of inverter modules NXV0040 and NXV0100 with some essential components
Due to the heavy weight of the device, it must be placed on a firm and horizontal surface.
The equipment has to be installed in a place where the room temperature is between -10ºC and
+40ºC. Lower temperatures prevent the equipment from starting up and higher temperatures limit
the output power.
The buzzing noise occurring during the operation of the equipment is normal. Do not install the
equipment in an occupied dwelling.
It is important to prevent small particles falling onto the device. Small particles
may enter the equipment through the ventilation grids and damage the equipment.
To Next Page
Loading...
