EasyManua.ls Logo

Vacon NXV0040 - 2 Technical Specifications; Inverter Ratings; Technical Data

Vacon NXV0040
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 • vacon TECHNICAL SPECIFICATIONS
Tel: +358-201-2121 • Fax: +358-201-212 205
2. TECHNICAL SPECIFICATIONS
2.1 Inverter ratings
Range of input voltages 340-800Vcc, 50 Hz, 3~
Inverter
type
Nom. output
power
[kW]
Recommended
max PV power
[kW]
Max al-
lowed PV
power
[A]
Max effi-
ciency [%]
Power con-
sumption at
night
[W]
Inverter
dimensions
[mm]
Inverter
weight
[kg]
NXV0010 10 12 50 >94% <5 600x1481x600 220
NXV0015 15 18.5 50 >94%
<5 600x1481x600 220
NXV0020 20 24 99 >94%
<5 600x1481x600 300
NXV0025 25 30 99 >94%
<5 600x1481x600 300
NXV0030 30 36 99 >94%
<5 600x1481x600 300
NXV0040 40 48 198 >95% <30 800x1881x600 550
NXV0050 50 60 198 >96%
<30 800x1881x600 550
NXV0080 80 96 353 >96%
<30 800x2281x600 850
NXV0100 100 120 353 >96%
<30 800x2281x600 850
Table 2-1. Power ratings, dimensions and weights
2.2 Technical data
DC Input
Range of input voltages 340...800 VDC
Maximum input voltage 900 VDC
AC Output
Mains voltage 3*400 ± 10%
Galvanic isolation For each isolator transformer attached
Frequency 50/60 Hz ± 0,5%
Cos
φ
>0.99, for output 20%-100% of Pn
Harmonic distortion < 2.5% for output > 30% of power
Consumption at night < 5W (NXV0010...NXV0030); <30 W (NXV0040...NXV0100)
Maximum efficiency > 94...96%
Ambient temperature -10...+40°C; 1-% derating for each degree up to 50°C required
Relative humidity
< 95% no condensation
Protection IP21
Display
Alfanumeric display per unit with two lines of 14 characters, leds
indicating functioning, plus fault and function push buttons.
Signalling 3 potential free contacts to indicate faults and alarms
Communications May include one of the following communication buses as an op-
tional feature: Modbus RTU, Ethernet (Modbus/TCP), RS485, GPRS,
string and inverter monitoring
May include a monitoring system with http-access as an optional
feature.
IEC61000-3-3 For the product to meet the technical requirements of IEC 61000-3-
3, the supply should have a system impedance accordingly:
NXV0015: Zsys = 0.105 ohm
NXV0030: Zsys = 0.270 ohm
NXV0050: Zsys = 0.176 ohm
NXV0100: Zsys = 0.136 ohm
Ambient condi-
tions
Altitude Max. 2,000m
Environmental category Indoor, conditioned
Pollution degree PD2
Overvoltage
category
AC (Mains) OVCIII
DC (Panels) OVCII
Table 2-2. Technical data

Related product manuals