10 INSTALLATION AND OPERATING INSTRUCTIONS
1. Ensure Vacuum Seal cover is closed but not locked.
2. Securely insert one Wine Stopper into the top of the opened
wine bottle (see Fig 5).
Note:
Do not use on Sparkling Wine.
3. Connect one end of the Vacuum Seal Hose to the Vacuum Seal
Hose port and the other end of the Wine Stopper in the wine
bottle; ensure connections are pushed in tightly.
4. Press the Canister Button to draw out air from the wine
bottle through hose attachment. Vacuum action will stop
automatically when all air has been drawn out.
5. Remove Vacuum Seal Hose connection from Wine Stopper
6. Repeat steps 2 -5 for other wine bottles.
7. When all wine bottles have been sealed remove Vacuum Seal
Hose from Vacuum Seal Hose Port.
8. Store the Vacuum Seal Hose back inside the Roll Storage
Compartment lid.
Fig 5
D. Preserving Wine
To Next Page
Loading...