INSTALLATION AND OPERATING INSTRUCTIONS 11
1. Ensure lunchboxes are clean and dry. (see Fig 6).
2. Fill lunchboxes with food to be preserved and secure lid onto
the lunchbox.
Note:
Ensure that the grey rubber plug on the lunchbox lid is in
place.
3. Connect one end of the Vacuum Seal Hose to Square Adapter
(see Fig 6a) and the other end to the Vacuum Seal Hose Por t.
Ensure both connections are pushed in tightly.
4. Fit the Square Adapter over the square that is in the centre of
the lunchbox lid.
5. Whilst firmly holding down the Square Adapter, press Canister
button to begin vacuum process. Vacuum action will stop
automatically and the indicator light will turn off when all air
has been drawn out from the Lunchbox.
6. Repeat Steps 2-5 for other Lunchboxes to be sealed.
7. To open Lunchbox after vacuum packaging, remove the grey
rubber plug that is in the middle of the Lunchbox lid.
E. Preserving Food in Lunchboxes
Fig 6a
Fig 6
To Next Page
Loading...